Hyundai Accent Handbrake Adjustment
A brief photo report with instructions on "How to adjust the handbrake on a Hyundai Accent LC".
It usually takes a long time to find information on the internet about adjusting the Accent handbrake without using an inspection pit or ramps. Indeed, it is quite possible to tighten the handbrake from inside the car, as shown in the photo report.
regarding tools, you will only need a couple of screwdrivers and a 12 mm spanner to adjust the position of the cable adjustment nut. The tension tightness is up to your preference (optimally 3 clicks).
Tightening the handbrake cable on a Hyundai Accent is particularly useful after replacing the rear brake pads.
For convenience, slide the driver's and passenger's seats all the way forward.
After that, unscrew the screws located on both sides of the rear cup holder. The left side.
And the screw on the right.
Then lift the console. We now have access to the necessary adjustment area.
Locate the required nut.
Close-up view. You need to know that tightening must be done with the handbrake released, turning the nut so that the cable holder moves towards the front seats.
That is all. Tighten to the desired number of clicks. Reassembly is carried out in the reverse order.
Was this guide useful?
Your feedback helps us improve our content.
Related Materials
Discussion (0)
No comments yet!